HSC1140 INOX 30kW
Voltage: 3/PE/AC/50Hz/400V
Operating Pressure: 30-180bar/3-18MPa
Max. Pressure: 200bar/20MPa
Discharge capacity: 300-1000l/h
Nozzle size: 055
Heating-Power: 30kW
Hot water capacity: 30-80°C
Pump speed: 1400r.p.m
Connected load: 36,5kW / 57,0A
Electrical protection: 3x63A slow-blowing
- Water-Supply separation acc. water reg.
- Chemical supply in high-pressure Jet c/w. Metering-valve
Self-Supporting, robust, device-chassis made from galvanized steel and powder-coated (Option INOX: Device-chassis made out of stainless-steel), Suitable for floor installation, Stainless-Steel Hotwater-Boiler with 65l capacity with pre-heating and buffer storage for immediate hot-water use and hot-water preparation during Stand-By operation. Triplex-Piston pump with chromium-nickel pump head (hot-water resistant), High-Performance ceramic piston, Stainless-Steel valves, Leakage-return, Etronic II Controls: (Start-Stop system with switch-off delay, Stand-By System for heating, OPH-Counter with service infromation, Low-water cut-off), Unloader Safety-Valve c/w. infinitely variable pressure and quantity regulation, Seperat space for 2 x 20l cleaning detergent-container c/w. remote activation, 2 different Operating Control Level, 3 robust On-Off rotary switches for h.p. Pump, Heating and Detergent, 5,0m connection cable